| | |
| | |
Stat |
Members: 3645 Articles: 2'501'711 Articles rated: 2609
20 April 2024 |
|
| | | |
|
Article overview
| |
|
Developing the Technique of Measurements of Magnetic Field in the CMS Steel Yoke Elements With Flux-Loops and Hall Probes | V. I. Klyukhin
; D. Campi
; B. Curé
; A. Gaddi
; H. Gerwig
; J. P. Grillet
; A. Hervé
; R. Loveless
; R. P. Smith
; | Date: |
29 Sep 2011 | Abstract: | Compact muon solenoid (CMS) is a general-purpose detector designed to run at
the highest luminosity at the CERN large hadron collider (LHC). Its distinctive
features include a 4 T superconducting solenoid with 6 m diameter by 12.5 m
long free bore, enclosed inside a 10000-ton return yoke made of construction
steel. Accurate characterization of the magnetic field everywhere in
theCMSdetector, including the large ferromagnetic parts of the yoke, is
required. To measure the field in and around ferromagnetic parts, a set of
flux-loops and Hall probe sensors will be installed on several of the steel
pieces. Fast discharges of the solenoid during system commissioning tests will
be used to induce voltages in the flux-loops that can be integrated to measure
the flux in the steel at full excitation of the solenoid. The Hall sensors will
give supplementary information on the axial magnetic field and permit
estimation of the remanent field in the steel after the fast discharge. An
experimental R&D program has been undertaken, using a test flux-loop, two Hall
sensors, and sample disks made from the same construction steel used for the
CMS magnet yoke. A sample disc, assembled with the test flux-loop and the Hall
sensors, was inserted between the pole tips of a dipole electromagnet equipped
with a computer-controlled power supply to measure the excitation of the steel
from full saturation to zero field. The results of the measurements are
presented and discussed. | Source: | arXiv, 1109.6465 | Services: | Forum | Review | PDF | Favorites |
|
|
No review found.
Did you like this article?
Note: answers to reviews or questions about the article must be posted in the forum section.
Authors are not allowed to review their own article. They can use the forum section.
browser Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)
|
| |
|
|
|
| News, job offers and information for researchers and scientists:
| |